Appointment-only · Melbourne private listening and room measurement · Australia-wide product enquiriesFree Room Bass Analysis

REL ACOUSTICS · SUBWOOFERS

REL Planar PL-2

A shallow subwoofer with included wireless audio, for wall mounting or the optional Planar Cart.

$5,999

3-year standard Australian warrantyAvailable to order in Australia. Stock and delivery timing are confirmed for each enquiry.Price for one subwoofer, including GST. Optional accessories and purchases of multiple units are quoted separately.

Free shipping Australia-wide. Change-of-mind returns are not accepted. This does not limit rights available under Australian Consumer Law.

New product · Contact us to order

REL Planar PL-2: slim black cabinet with a fabric grille

USES

Using the REL Planar PL-2

Purpose

  • Planar PL-2 is for listeners who want to add bass without placing a deep cabinet in the room. Compared with PL-1, it has a wider cabinet and a lower manufacturer-rated bass extension. Wall mounting or the optional Planar Cart provides the placement options, while included Airship Direct wireless reduces the need for a long audio cable. The subwoofer still needs mains power.

PRODUCT DESIGN

Design and features

01

Driver and cabinet design

The shallow cabinet uses an 8-inch FlatPiston active driver at the front and a 10-inch FibreAlloy passive radiator at the rear. Its 650 mm width is greater than PL-1.

CONNECTIONS

Connections and system matching

Check the inputs and outputs against the equipment you already use. If you have a connection question, send us the model names or a photograph of the sockets.

Connecting and setting up

  • High Level takes a signal from a compatible amplifier’s speaker terminals. Alternatively, connect a volume-controlled preamplifier output to the RCA Low Level input.
  • The separate RCA .1/LFE input connects to an AV receiver or processor’s subwoofer output, with its own level control.
  • Choose either the subwoofer’s wired inputs or the Airship Direct wireless path; do not feed audio through both paths simultaneously. High Level and Low Level are alternatives and must not be used together. On the chosen path, High Level and the separate .1/LFE input can operate together for the theatre setup described in the manual.
  • For High Level wiring, follow the amplifier-specific instructions, especially for Class D, balanced, bridged or monoblock amplifiers.

Points to consider

  • The quoted low-frequency extension is a manufacturer specification. Bass level and decay at your seat also depend on placement and the room.

INSTALLATION

Placement and installation

PRODUCT DETAILS

Technical specifications

Manufacturer specifications

Acoustic configuration
1 front-firing active woofer; 1 rear-firing passive radiator
Active driver
8 in (205 mm) FlatPiston long-throw driver
Passive radiator
10 in (250 mm) rear-firing FibreAlloy passive radiator
Manufacturer low-frequency extension
-6 dB at 24 Hz, in room
Amplifier
550 W RMS Pure Class D
Dimensions (W × H × D)
650 × 480 × 144 mm (W × H × D); add 39 mm depth for the wall bracket
Net weight
20.25 kg
Finish options
Gloss Piano Black or Gloss White Lacquer

OPTIONS

Finishes and configuration

Finish

  • Gloss Piano Black or Gloss White Lacquer

Configuration and included items

Airship Direct wireless audio is included. The subwoofer still needs mains power. The Planar Cart and wooden grille are optional accessories.

ROOM MEASUREMENT

Understand how bass behaves in your room.

Room & Bass Measurement checks which bass frequencies stand out or fade slowly, and how a subwoofer works with your main speakers. We listen with you, measure and try practical adjustments where possible. No product purchase is required.

View Room & Bass Measurement

FAQ

Common questions

Is wireless included, and does it remove every cable?+

Airship Direct wireless audio is included. It carries the audio signal, so you can avoid a long signal cable to the subwoofer. The subwoofer still needs mains power. The Planar Cart is an optional accessory.

What is the practical difference between PL-1 and PL-2?+

PL-1 is 522 mm wide; PL-2 is 650 mm wide. Both have a 144 mm-deep cabinet before allowing for the wall bracket. REL rates PL-1 at 31 Hz and PL-2 at 24 Hz, both at -6 dB in room. PL-1 is the narrower option; PL-2 trades additional width for a lower manufacturer-rated extension.

What does the Australian price for REL Planar PL-2 cover?+

$5,999 is the price for one subwoofer, including GST, with a 3-year standard Australian warranty. Any optional accessories and delivery timing will be listed in your quotation. These warranty terms do not limit statutory consumer guarantees under Australian Consumer Law.

FURTHER READING

Manufacturer information and manuals

Read REL’s product information, setup instructions and support guidance.

AUSTRALIAN ENQUIRY & SUPPORT

Enquire about REL Planar PL-2

Tell us which speakers and amplifier you use, where a subwoofer could fit, and what you would like to hear differently. We can help compare connection and model options, then confirm configuration and supply in your quotation.

REL AcousticsREL Planar PL-2

We use your details to review and respond to this enquiry. Product updates are optional; advertising measurement follows your Privacy options in the footer.

Do not include passwords, payment details, serial numbers or sensitive personal information.

Prefer to text us?Text MSN Audio
EnquireMessenger
Message us on Messenger