A compact powered monitor to consider for music, cinema or studio use, with a 6.5-inch W-cone woofer and beryllium tweeter. For production work, its single-driver Focus mode checks the middle of a mix from the same listening position.
$5,798per pair
GST Included · BlackHistorical retailer reference; enquire for a current quote.
Solo6 is narrower than Twin6 and uses one woofer. Twin6 adds a second 6.5-inch driver in a wider cabinet; Trio6 adds a separate midrange and bass driver.
For a music or cinema system with limited speaker space, its 246 mm width is a useful starting point. Built-in amplification lets you use a compatible XLR source with volume control without adding a separate power amplifier.
Official Focal photograph. Front view.Official Focal photograph. Rear view.Official Focal photograph. Side view.
DESIGN
What makes Solo6 ST6 distinctive?
01
Focus on the essential balance
Focus mode runs the woofer alone over a reduced frequency range. It is useful for checking vocal and instrument balance, alongside the normal two-way listening mode. Use a footswitch to change Focus mode. Confirm the required switch and supplied accessories when arranging the system.
02
Adjustment near the desk
Rear-panel shelving, high-pass choices and a 160 Hz adjustment help with setup. Use measured results and familiar programme material to choose settings.
SYSTEM SETUP
Connections and placement
Source and volume control
Use a compatible balanced XLR line-level connection from a DAC or preamplifier with volume control, a monitor controller or an audio interface. Confirm output level and volume control before connecting. Amplification is built in; do not connect a power amplifier’s speaker output.
Room and listening position
Match left/right placement around the listening position and check reflections from desks and nearby walls. Use measurement to assess the bass response at the seat.
SPECIFICATIONS
Manufacturer specifications
Manufacturer specifications
Design
2-way active monitor
Frequency response (±3 dB), full-range mode
40 Hz to 40 kHz
Cabinet dimensions (H × W × D)
334 × 246 × 295 mm
Cabinet weight, each
13 kg
Inputs
Balanced XLR
Manufacturer specifications describe the product under Focal’s stated conditions. They are not the frequency response measured in your room.
Twin6 puts two 6.5-inch W-cone drivers in a horizontal cabinet. It suits a monitoring position where a wider, lower speaker profile works better than a tall three-way enclosure.
$8,798per pair
GST Included · Standard finishHistorical retailer reference; enquire for a current quote.
Compare Trio6 ST6 for a music-listening setup or studio with space for a three-way monitor. An 8-inch bass driver, 5-inch midrange and beryllium tweeter handle full-range playback; two Focus modes provide reduced-bandwidth checks for production work.
Use a compatible balanced XLR line-level connection from a DAC or preamplifier with volume control, a monitor controller or an audio interface. Confirm output level and volume control before connecting. Amplification is built in; do not connect a power amplifier’s speaker output.
What does the displayed price cover?+
The displayed reference price is for a pair of monitors, includes GST and is based on two historical single-unit retailer RRPs. Please enquire for a current quote and availability.
The retailer RRP reference was retrieved on 1 November 2026 from an older cached listing. This is the cache access date, not the date the retailer updated its page. The current manufacturer RRP has not been independently reconfirmed.
AUSTRALIAN ENQUIRY & SUPPORT
Enquire about Focal Solo6 ST6
Tell us about your listening distance, room and existing source. We can discuss model fit and the current supply proposal for your enquiry.